
Training Basic Instrument & Control
Instrumentation is the art of measuring the value of some plant parameter, pressure, flow, level or Temperature to name a few and supplying a signal that is proportional to the measured parameter. The output signals are standard signal and can then be processed by other equipment to provide indication, alarms or automatic control. There are a number of standard signals; however, those most common in a plant are the 4-20 mA electronic signal and the 20-100 kPa pneumatic signal.
This section of the course is going to deal with the instrumentation equipment normal used to measure and provide signals. We will look at the measurement of four parameters: pressure, flow, level, and temperature,
Classification instrument is pneumatic instruments vs. electrical/electronic instruments, It will also looked at a simple example system involving an instrument that can collect and transmit data. It will discuss various sensors such as orifice plates, thermocouples, and RTDs, and we will review instruments and transmitters used for measuring these four physical variables
GARIS BESAR PROGRAM :
- Introduction to instrument and Control Syatem
- Process and Instrument diagrams (P&ID’s)
- Level Measurements & Instrumentation
- Flowmeter Selection & Instrumentation
- Presure Measurement & Instrumentation
- Temperature Measurement & Instrumentation
- Control Valve Selection & Sizing
- Components of feedback control loop
- Automatic Control & Tuning Techniques
- Advanced Instrumentation Components
- Effect of sensors
- On/Off control action
- Analog (continuos) control
- Application of different control modes (P, PI, PD, PID)
- Proportional, Proportional-Integral, and Proportional-Integral-and-Derivative Controllers
- PLC Control
- SCADA Control
- Troubleshooting
Discusse and Study Case
Pembicara / Fasilitator
Team Trainer Johnson Indonesia.
- Ir. Tugino, ST. MT. IPM ASEAN Eng.
Program difasilitasi oleh trainer profesional dan praktisi yang memiliki kompetensi dalam bidang nya
Jadwal Training :
Jadwal pelaksanaan mengikuti kalender Public Training Johnson Indonesia dan dapat disesuaikan dengan kebutuhan peserta maupun perusahaan.
Durasi: 3 hari.
Jam Pelaksanaan: 09.00–16.00 WIB.
Pelaksanaan juga dapat disesuaikan melalui program In-House Training.
Metode Pelaksanaan
Offline Training
Pelatihan tatap muka di hotel atau lokasi training Johnson Indonesia di Jakarta, Bandung, Bali, Surabaya, Yogyakarta, dan kota lainnya.
Online Training
Pelatihan interaktif melalui Zoom Meeting.
Private Training
Pelatihan khusus dengan jumlah peserta terbatas untuk pembelajaran lebih intensif.
In-House Training
Pelatihan eksklusif untuk perusahaan dengan materi yang dapat disesuaikan berdasarkan kebutuhan dan standar pelayanan organisasi.
Fee Investasi Training
Offline Training Jakarta
Hubungi Admin – pelaksanaan 2 hari.
Fasilitas:
- Seminar Kit.
- Training Materials.
- Sertifikat Pelatihan.
- Lunch.
- Coffee Break.
- Souvenir.
Minimal 3 peserta untuk penyelenggaraan di hotel.
Offline Training Luar Jakarta
- Hubungi Admin – Pasti Running.
Private Onsite Training
Hubungi Admin – pelaksanaan 3 hari.
Lokasi: Johnson Indonesia Training Center, Jakarta Barat.
Online Training
Hubungi Admin – pelaksanaan 2 hari.
Waktu: 09.00–16.00 WIB.
Biaya dan fasilitas dapat disesuaikan berdasarkan metode pelaksanaan serta penawaran terbaru Johnson Indonesia.
JOHNSON INDONESIA – Training Provider Since 2002
HR Services & Training Provider
Komp. Perkantoran Daan Mogot Baru, Jl. Bedugul 3A No. 10, Kalideres, Jakarta Barat 11840.
Website: www.seminarjohnson.com
WhatsApp: 0815 9725 020
